When it comes to your engine’s longevity, there’s nothing more crucial than a healthy cooling system. Should your vehicle ever overheat, the resulting damage could be bad enough to require a lengthy, expensive repair like an engine replacement! But by taking just a few preventive maintenance measures with your local Albuquerque, NM Auto Repair, you will extend the life of your vehicle significantly.
Your cooling system contains several different components, all of which need their own individual attention.
The parts that are most susceptible to damage and erosion are the rubber coolant hoses. If any of these hoses are inflexible or brittle, they should be replaced as soon as possible by an ASE-Certified tech at your local Albuquerque NM Auto Repair.
If any of these hoses have bulges or kinks, they should also be on their way out. However, you can’t always tell if a hose is bad just by looking at it. That’s why you should periodically take your vehicle to an Albuquerque NM Auto Repair to have an ASE-Certified tech check out your car’s cooling system.
By replacing these damaged or deteriorating hoses, you’ll prevent overheating and major wear on engine components. A modern engine’s parts are in constant motion, and increased friction will cause them to break down due to overheating.
If you do notice a coolant leak, it’s probably a good idea to keep a roll of duct tape handy in an emergency situation. This’ll tide you over until you can get your vehicle to an ASE-Certified tech at an Albuquerque NM Auto Repair.
If your hoses are showing signs of wear, it’s probably time to visit an Albuquerque NM Auto Repair for a cooling system check. Other cooling system-related maintenance may be needed, too, like a new thermostat or a cooling system flush. A good, ASE-Certified tech like the ones at Don Brown Parts & Automotive may suggest other preventive issues that will keep your car on the road for years to come. Stop by or call us today!